Product List
- Gear oil pump
- Micro gear oil pump
- High pressure small displacement gear oil pump
- CBK1 gear pump
- Cbk2 gear oil pump
- Cbk2 gear oil pump
- CBG gear pump (single stage pump)
- Cb-h series gear pump
- Ghp1aq high pressure small displacement gear oil pump
- Ghp1al high pressure small displacement gear oil pump
- Ghp1a high pressure small displacement gear oil pump
- Cb-g gear pump
- Cbt-g0.5 gear pump
- Large displacement gear oil pump
- Cb-qz gear pump
- Cbt-e 420 gear pump (duplex)
- CBG duplex pump
- Bm-k130 oil motor
- CBZ pump set
- Cby3 series gear pump
- Cb-p series gear pump
- CBG gear pump
- 2CY
- Cbw2 gear pump
- Cbw1 gear oil pump
- Cba-b gear
- CB-B gear pump
- CB gear oil pump
- Cbt-e5 gear pump
- Full View Drawing
- Cbf-e4 gear oil pump
- Cb-fc gear pump
- Cb-fa gear pump
- Oil filter truck
- Oil pump
- Power unit
- Disabled vehicle power unit
- Is1-00 two way rotary power unit (with hydraulic control check valve) - see Fig.
- Is1-00 bidirectional rotating power unit (see Fig. 1)
- Power unit for car flap
- 380V electric power unit
- 220 V electric power unit
- Scissors lifter (large) power unit
- Scissors lifter (small) power unit
- Manual power unit with pressure gauge
- Power unit with manual directional valve
- Hydraulic power unit of lift
- All kinds of valves
- Dyb1-01a-006-1 buffer valve
- Dyb1-01a-006-2 buffer valve
- Is1-18 hydraulic control check valve
- Is1-15 two position three way solenoid directional valve
- Jsj3-01-02-4 relief valve
- Is1-16 pressure compensation check valve
- Jsj3-01-02-2 manual directional valve
- Jsj3-01-02-3 check valve
- Two position two way check valve
- Two position two way check valve
- Two position two way electromagnetic unloading valve
- Wood chopper
- Shunt
Contact Us
WUXI EASTHYDRAULIC MACHNIEY MANUFACTURING CO.,LTD.
Add:No.31,Wind energy road,HuiShan District,Wuxi
Tel:0510-83101137
Code:214000
Website:www.lielm.com
Is1-16 pressure compensation check valve
Is1-16 pressure compensation check valve
Working principle
No matter how the load of port 1 changes, the flow of port 2 can be kept within a rated range. The size of the fixed orifice depends on the flow requirement of the customer.
When the pressure oil is from ① to ②, and the pressure difference is greater than 0.5MPa, the general pressure difference is between 7.5Mpa and 24MPa. The valve begins to respond to the load change. Through pressure compensation, the flow of the valve is accurately kept within a rated range; In the opposite direction, ② to ①, there is no pressure compensation.
Full View Drawing
Technical Specifcations
